Increase System Performance In XP

To Increase System Performance

Right click my computer.
Click properties.
Click advanced.
Click settings (under performance).
Click Adjust for best performance.
Scroll to the bottom and check the last one �use visual styles on windows and buttons�.

-How to Disable XP's crap built in CD Burner

Click the start button.
Select Run.
Type services.msc and click ok.
Go to IMAPI CD-Burning Com Services open it and click on start up type, change to "Disabled".

-Fine Tune Your Systems Memory

These Settings will fine tune your systems memory
You need at least 256MB of ram to do this:
Go to Start > Run then type in REGEDIT -and then to the following key:
HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Control\Session Manager\Memory Management

1.DisablePagingExecutive -Double click it and in the decimal put a 1 - this allows XP to keep data in memory now instead of paging sections of ram to harddrive yeilds faster performance.

2.LargeSystemCache- Double click it and change the decimal to 1 -this allows XP Kernal to Run in memory and improves system performance a lot.

3.IOPageLockLimit - Create a new dword and name it double click it and set the value in hex - 4000 if you have 128MB of ram or set it to 10000 if you have 256MB set it to 40000 if you have more than 512MB of ram -this tweak will speed up your disckcache.

Reboot

-Unable to delete from Avi files from HD

XP holds files in it's memory even after you have closed the application using them making it impossible to delete them from your harddrive. To fix this:
Start -> Run -> Regedit
Find the HKEY_CLASSES_ROOT\SystemFileAssociations\.avi\shel lex\PropertyHandl er\ directory and delete the "DEFAULT" key.

-Tweak The Swap File

For Users with 256 MB RAM or more this tweak will boost their Windows- and Game-Performance.
What it does: It tells Windows not to use any Swap File until there is really no more free RAM left.
Open the System Configuration Utility by typing msconfig.exe in the RUNConservativeSwapfileUsage =1" under the 386enh section.
Restart your Windows and enjoy better Game performance
command. There in your System.ini you have to add "

-Disable Services

XP Pro runs a lot of services by default that are pointless if your not on a corporate network, the following services are ones that I safely disable thereby freeing up memory but check what each one does first to make sure your not using it for something:

Go to Run and type services.msc, right click on each service, properties and choose disable.

Alerter
Application Layer Gateway Service,
Application Management
Automatic Updates
Background Intelligent Transfer
Clipbook
Distributed Link Tracking Client
Distributed Transaction Coordinater
Error Reporting Service
Fast User Switching Compatibility
IMAPI CD-Burning
Indexing Service
IPSEC Services
Messenger
Net Logon
Net Meeting
Remote Desktop Sharing
Network DDE
Network DDE DSDM
Portable Media Serial Number
Remote Desktop Help Session Manager
Remote Registry
Secondary Logon
Smartcard
SSDP Discovery Service
Telnet Themes
Uninterruptible Power Supply
Universal Plug and Play Device Host
Upload Manager
Webclient
Wireless Zero Configuration
WMI Performance Adaptor

-Speed Up The File System

NTFS is a great file system, but its feature-set comes at a slight cost in performance. You can negate this a little with the following tips:

* By default NTFS will automatically update timestamps whenever a directory is traversed. This isn't a necessary feature, and it slows down large volumes. Disable it by going to Run and type regedit:

HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Control\FileSystem and set 'DisableNTFSLastAccessUpd ate' to 1.

* NTFS uses disparate master file control tables to store filesystem information about your drives. Over time these core MFT files grow and become fragmented, slowing down all accesses to the drive. By setting aside a little space, MFT's can grow without becoming fragmented.

In the same key where you disabled the last access feature creat a new DWORD value called 'NtfsMftZoneReservation' and set it to 2.

-Disable DLL Caching

Windows Explorer caches DLLs (Dynamic-Link Libraries) in memory for a period of time after the application using them has been closed. This can be an inefficient use of memory.

1. Find the key [HKEY_LOCAL_MACHINE\SOFTWA RE\Mcft\Windows\Curr entVersion\Explorer].

2. Create a new DWORD sub-key named 'AlwaysUnloadDLL' and set the default value to equal '1' to disable Windows caching the DLL in memory.

3. Restart Windows for the change to take effect.

-Tweak The Prefetch

1. Run "Regedit"
2. Goto [HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Contro l\Session Manager\Memory Management\PrefetchParame ters\EnablePrefetcher]

3. Set the value to either 0-Disable, 1-App launch prefetch, 2-Boot Prefetch, 3-Both ("3" is recommended).

4. Reboot.

It will decrease the boot time but double and increase the performance of your XP.


-Performance Increase Through My Computer

Easy enough tweak to usually find out about it on your own, but still, some of us still don't find it right away. So here it is:

Start > right-click on My Computer and select Properties.
Click on the "Advanced" tab.
See the "Performance" section? Click "Settings".
Disable the following:

Fade or slide menus into view
Fade or slide ToolTips into view
Fade out menu items after clicking
Show Shadows under menus
Slide open combo boxes
Slide taskbar buttons
Use a background image for each folder type
Use common tasks in folders
There, now Windows will still look nice and perform faster.

-Remove Windows Messenger

Go to Start/Run, and type: "rundll32 setupapi,InstallHinfSection BLC.Remove 128 %SystemRoot%INFmsmsgs.inf"

Do Not Highlight Newly Installed Programs

Tired of that annoying little window that pops up to tell you that new software is installed? If it gets in the way when you?re logging off, turn it off completely. To do this:

Click Start, right-click at the top of the Start menu where your name is displayed, and then click Properties.
In the Taskbar and Start Menu Properties dialog box, on the Start Menu tab, click Customize.
Click the Advanced tab, and then clear the Highlight newly installed programs check box.
Click OK, and then click OK again.

-Customize the Start menu

The Start menu gets more real estate in XP than in previous versions, and it's more customizable. To make the Start menu display only the applications you want, rather than the default determined by Mcft:

Right-click in an empty section of the Start menu's left column.
Select Properties > Start Menu > Customize. Here you'll find a list of your most frequently used programs. (XP keeps track of what you use and what you don't, then updates this list dynamically).
Don't want your boss to know that Pinball, Solitaire, and Quake all make your list?

Go to the General tab, click Clear List, and set the counter to zero.

- Search Companion Error

When doing a file search, if you get the error A File That Is Required to Run Search Companion Cannot Be Found

Log on as an Administrator
Click Start
Select Run
Enter in the command - %systemroot%\inf
Right-click the Srchasst.inf file
Click Install

-Installing the Backup Program on the Home Version

By default, the NTBACKUP program is not installed on the home version.

You can find it on the CD in the \VALUEADD\MSFT\NTBACKUP directory

Since not all vendors include the actual source code for XP,
you can download a copy

-Changing Drive Letters

If you want to change the letters assigned to your fixed or removable drives:

Right Click on My Computer
Select Manage
Select Disk Management
For a Fixed Disk:

Select it
Right click
Select Change Drive Letter and Path
Click on the Edit button
Enter in the letter you want to use
For a Removable Disk:

In the lower, right hand panel, right click on the Disk or CD ROM #
Select Change Drive Letter and Path
Click on the Edit button
Enter in the letter you want to use


[color=red]- Turn off the Windows Picture and Fax Viewer as the Default Image Viewer

You can also change the file associations for the specific file types you want.

Open the Windows Explorer
Go to Tools / Folder Options / File Types
Scroll down to the extension you want to change
Click on the Change button
Select the program you want to associate with that extension
Click on the OK button

If the Windows Picture and Fax Viewer is set as the default for many of your graphic file types,
you can remove it so other graphics programs can be used.

Run Regedit
Go to HKEY_CLASSES_ROOT / SystemFileAssociations / image / ShellEx / ContextMenuHandlers
Delete the key ShellImagePreview
Download reg file

-Allowing Network Access with Blank Passwords

Although you can log in locally without a password, by default, WindowsXP Pro does not allow network users to access the computer without a password. Typically you will receive an Unknown error 31 if this is the case.

To change this setting:

Run gpedit.msc
Go to Computer Configuration / Windows Settings / Security Settings / Local Policies / Security Options
Double click on Accounts: Limit local account use of blank passwords to console login only
Disable this option

-Changing the Default DOS Window Properties

If you want to change the default DOS windows properties like:

Size
Color
Font
Buffer Size
Window / Full Screen
Open up a DOS window
Right click on the Title Bar
Select Defaults
Make any of the changes you like
All subsequent DOS windows will assume these defaults

-Changing the Registered Owner

Start Regedit
HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows NT\CurrentVersion
From there you can edit the name in the Registered Owner key

-Opening a Command Prompt to a Particular Directory from Explorer

If you want to open a command prompt to a directory that is selected in the Explorer:

Start Regedit
Go to HKEY_CLASSES_ROOT \ Directory \ shell
Create a new key called Command
Give it the value of the name you want to appear in the Explorer. Something like Open DOS Box
Under this create a new key called command
Give it a value of cmd.exe /k "cd %L"
Now when you are in the Explorer, right click on a folder, select Open DOS Box, and a command prompt will open to the selected directory.
Download reg file

-Adding Time Servers

With WindowsXP, you can double-click on the time in the System Tray and connect to Time Servers on the Internet to synchronize with.
To add to the list of available servers:

Start Regedit
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows\Curr entVersion\DateTime\Servers
Add new string keys named 2, 3, etc. with a value of the time server you want to use.

-Creating a Boot Floppy

To create a bootable floppy from within WindowsXP:

Insert a floppy into the A: drive
Open the Explorer
Right click on the A: Drive
Select Format
Check Create an MS-DOS startup disk
Click on the Start button
This will create a Millennium boot disk

-Changing the Login Screen Saver

If you want to change the screen saver that runs at the login prompt:

Start Regedit

Go to HK_USERS / .DEFAULT / Control Panel / Desktop
Double click on SCRNSAVE.EXE
Enter in the screen saver you want to use

-Running NetMeeting

To run NetMeeting:

Do a Start / Run
Enter conf
Answer the prompts along the way for name, e-mail etc.

-Set the Online Registration as Being Completed

You can set WindowsXP to assume the online registration has been completed.

Run Regedit
Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Mcft \ Windows NT \ CurrentVersion
Create a String Value called RegDone
Give it a value of 1
Download reg file

Decreasing Boot Time

Mcft has made available a program to analyze and decrease the time it takes to boot to WindowsXP
The program is called BootVis

Uncompress the file.
Run BOOTVIS.EXE
For a starting point, run Trace / Next Boot + Driver Delays
This will reboot your computer and provide a benchmark
After the reboot, BootVis will take a minute or two to show graphs of your system startup.
Note how much time it takes for your system to load (click on the red vertical line)
Then run Trace / Optimize System
Re-Run the Next Boot + Drive Delays
Note how much the time has decreased
Mine went from approximately 39 to 30 seconds.

Re-Enabling System Restore

If you previously disabled system restore through the Group Policy Editor,
the option to start it again does not show in the System Properties.
You can re-enable it again by:

Run the Group Policy Editor (gpedit.msc)
Go to Computer Configuration / Administrative Templates / System / System Restore
Set Turn off System Restore and Turn off Configuration to Disable
Right click on My Computer
Select Manage
Go to Services and Applications / Services
Scroll down to System Restore Service
Set it for Automatic
Click on the Start button to start the service
Close down this window
Go back to the Group Policy Editor and configure both to Not configured
Now when you right click on My Computer, there should be a tab for System Restore and you can configure how much space will be used.

-Hide/Unhide Logon Names

If you want to hide or unhide the names of users that are displayed on the initial logon screen:

Start Regedit
Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Mcft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList
Add a DWORD with the name of the user account you want to hide
Make sure it has a value of 0
If there is an existing account, you can unhide it by giving it a value of 1

-Speed up start menu

Start -> Run -> regedit

HKEY_CURRENT_USER\Control Panel\Desktop and then right click on ""MenuShowDelay" and click on "Modify", the figure you have here is in milliseconds. The standard is 400, I have mine set to 50, 0 is instant.
Take your pick

Autoexec.nt or Config.nt Errors

If you are getting errors similar to:
The system file is not suitable for running MS-DOS and Mcft Windows applications. Choose 'Close' to terminate the application.

Try copying the file from \windows\repair directory to the one that is in the \windows\system32 directory.

--------------------------------------------------------------------------------

Common Control Panel Applets


The follow are some common Control Panel Applets that are located in the \windows\system32 directory.
If you find yourself using any of these frequently, then you can simply make shortcuts to them on your desktop.

appwiz.cpl Add/Remove Programs
desk.cpl Display Properties
firewall.cpl Firewall Settings
inetcpl.cpl Internet Options
mmsys.cpl Sound and Audio
ncpa.cpl Network Connections
nusrmgr.cpl User Accounts
powercfg.cpl Power Options
sysdm.cpl System Properties
wscui.cpl Security Center
wuaucpl.cpl Automatic Updates Configuration

--------------------------------------------------------------------------------

Windows Explorer Opens Search Companion Rather than the Folder

If the Windows Explorer opens up the Search Companion rather than opening up the actual folder, the default setting for opening a folder is changed.

To correct this:

Start Regedit
Go to HKEY_CLASSES_ROOT \ Directory \ shell
Edit the default value to be explorer or none
Download reg file

--------------------------------------------------------------------------------

Running SFC without a CD ROM


If you run sfc /scannow and get prompted to insert a CD,
there are a couple of changes you might need to make.

Slipstream your copy of WindowsXP with the latest service pack you have applied.
For detailed unstructions on how to do this see:
SlipStreaming a Service Pack into Windows XP

Once these files are on your hard drive, you can simply make a few registry changes to point to those locations.

Start Regedit

Go to the follow locations and change the path to wherever you copied the source files.

HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows\Curr entVersion\Setup\ServicePackSourcePath
HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows\Curr entVersion\Setup\SourcePath
the last one might not be necessary
HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows NT\CurrentVersion\SourcePath


Guest Only Network Access

If you try and connect to an XP computer and are shown a logins screen with only the computername/Guest,
You may need to change one of the Local Security Policies:

Got to Control Panel - Administrative Tools
Go to Local Policies - Security Options
Check teh Network access: Sharing and security model for local accounts
Set it to Classic - local users authenticate as themselves

--------------------------------------------------------------------------------

Repairing Damaged Winsock2


The symptoms when Winsock2 is damaged show when you try to release and renew the IP address using IPCONFIG.

And you get the following error message:
An error occurred while renewing interface 'Internet': An operation was attempted on something that is not a socket.

Also Internet Explorer may give the following error message:
The page cannot be displayed Additionally, you may have no IP address or no Automatic Private IP Addressing (APIPA) address, and you may be receiving IP packets but not sending them.

There are two easy ways to determine if Winsock2 is damaged:

From the XP source files, go to the Support / Tools directory

Winsock Test Method 1
Run netdiag /test:winsock

The end should say Winsock test ..... passed

Winsock Test Method 2

Run Msinfo32
Click on the + by Components
Click on the by Network
Click on Protocol
There should be 10 sections if the Winsock2 key is ok
MSAFD Tcpip [TCP/IP]
MSAFD Tcpip [UDP/IP]
RSVP UDP Service Provider
RSVP TCP Service Provider
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...

If the names are anything different from those in this list, then likely Winsock2 is corrupted and needs to be repaired.
If you have any 3rd party software installed, the name MSAFD may be changed.
There should be no fewer than 10 sections.

To repair Winsock2

Run Regedit
Delete the following two registry keys:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Winsock
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Winsock2

Download Reg file to delete these entries

Restart the computer
Go to Network Connections
Right click and select Properties
Click on the Install button
Select Protocol
Click on the Add button
Click on the Have Disk button
Browse to the \Windows\inf directory
Click on the Open button
Click on the OK button
Highlight Internet Protocol (TCP/IP)
Click on the OK button
Reboot
Or Download Reg file to add the correct registries back in

--------------------------------------------------------------------------------

Not Displaying Previous Network Share Shortcuts


By default, when you go to Network Places, it will scan and show shortcuts to previous network shares.
To turn this off and remove any current shortcuts

Open up the Windows Explorer
Go to Tools / Folder Options / View
The top section should be Files and Folders
Uncheck Automatically search for network folders and printers
Then go into Network Neighborhood Select all the previous netowork connections Delete them
Next time you look at the Network Neighborhood, they should not repopulate

--------------------------------------------------------------------------------

Hiding a XP Computer from Network Neighborhood

If you want to share files from a XP computer,
yet want to remove it from showing up in the Network Neighborhood,

Run net config server /hidden:yes

--------------------------------------------------------------------------------

Easy Way to Share Multiple Folders


If you need to share multiple folders, running the program SHRPUBW.EXE will bring up a simple dialog box to let you:

Browse to the folder you want to share
Enter in a Share name
Ender in a Share description
Set permissions. Several choices are available
Restart the process from within the same program

--------------------------------------------------------------------------------

System32 Folder Opens When Logging On


If the System32 folder shows on the desktop, there may be an invalid entry in the Registry

Start Regedit
Go to both:
HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows\Curr entVersion\Run
HKEY_CURRENT_USER\Software\Mcft\Windows\Curre ntVersion\Run
Double check that the values do not have incorrect, incomplete, or blank entries


Not Viewing Zip Files as Folders


If you want to turn of WindowsXP showing Zip files as folders,
just run:

regsvr32 /u zipfldr.dll

--------------------------------------------------------------------------------

Setting Capslock, Numlock, Scroll Lock

If you want to set the startup state for any or all of these keys,
you just need to edit the registry.

Start Regedit
Go to HKEY_CURRENT_USER \ Control Panel \ Keyboard
Open InitialKeyboardIndicators
Change the value to one of the following numbers
0 - All Keys off
1 - Caps Lock on
2 - Num Lock on
4 - Scroll Lock on
For multiple keys, add their values:
3 - Caps Lock and Num Lock on
5 - Caps Lock and Scroll Lock on
6 - Num Lock and Scroll Lock on
7 - Caps Lock, Num Lock, and Scroll Lock on
Log off and back on again

--------------------------------------------------------------------------------

Running Network Diagnostics


Network Diagnostics scans your system to gather information about your hardware, software, and network connections.

Start / Run / NETSH DIAG GUI

The following is the type of information that can be displayed:

Ping
Connect
Show
Verbose
Save to Desktop
Mail Service
News Service
Internet Proxy Server
Computer Information
Operating System
Windows Version
Modems
Network Clients
Network Adapters
Domain Name System (DNS)
Dynamic Host Configuration Protocol (DHCP)
Default Gateways
Internet Protocol Address
Windows Internet Naming Service (WINS)

--------------------------------------------------------------------------------

DOS Tips in XP


Windows XP cmd tip (DOS isn�t dead... it just smells funny) Some command-line folder creation examples:

To create multiple folders at once, add them directly to the "md" command:

C:\> md this is a test

To create a folder several folders deep, use:

C:\> md this\is\a\test

Creating a folder with a long name requires the double-quote at the beginning:

C:\> md "this is a test

Bonus tip: Windows XP supports the forward slash "/" as a folder divider. Unix/Linux users: don't let the DOS environment get you down. Use a Unix-style CD command to change your present working directory:

C:\> cd Windows/system32/drivers/etc

Submitted by Bob and Tina

--------------------------------------------------------------------------------

Restoring Desktop Icon to the Quicklaunch Bar

If you mistakenly deleted the icon for the Desktop on the Quicklaunch toolbar

Go to C:\Documents and Settings\user_name\Application Data\Mcft\Internet Explorer\Quick Launch
(where user_name is replaced by your login name)

Create a Text file called ShowDesktop.SCF with the following contents:

[Shell]
Command=2
IconFile=explorer.exe,3
[Taskbar]
Command=ToggleDesktop

--------------------------------------------------------------------------------

Network Access After Norton Anti-Virus Install

Sometimes you can't access a WinXP computer after installing Norton Anti-Virus.
There might be a variety of errors at the other computer depending on the operating system.
On the XP computer, in the Event Viewer / System log, there will be the following error:
The server's configuration parameter "irpstacksize" is too small for the server to use a local device.

Start Regedit
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\lanmanserver\parameters
Edit the IRPStackSize
Give it a value of 15
Reboot the computeR